Commercial Walk-Behind Floor Scrubber – 16 in Cleaning Path, 18,000 Sq. Ft./Hr – US-TX SC16

The US-TX SC16 is a compact battery-powered commercial walk-behind floor scrubber designed for routine cleaning of compatible smooth and sealed hard-floor surfaces.

The US-TX SC16 has a 16 in cleaning path, providing a practical balance between cleaning productivity and maneuverability in smaller and medium commercial spaces.

The US-TX SC16 has a 23 in (580 mm) rear squeegee designed to recover dirty water behind the machine during cleaning.

The US-TX SC16 provides cleaning productivity up to approximately 18,000 sq. ft. per hour under suitable operating conditions.

The machine has a 9-gallon clean-water tank for water and compatible floor-cleaning solution.

The US-TX SC16 has an 11-gallon dirty-water recovery tank.

Yes. The machine uses separate 9-gallon clean-water and 11-gallon dirty-water tanks to keep fresh cleaning solution separated from recovered dirty water.

The US-TX SC16 uses a single-disc scrubbing system with a 16 in cleaning path.

The scrubber uses a 500W brush motor to provide consistent powered scrubbing performance.

The US-TX SC16 uses a 400W suction motor for dirty-water recovery through the rear squeegee.

The scrubbing system provides approximately 80 lb of brush pressure for effective contact with compatible hard-floor surfaces.

The US-TX SC16 uses a rechargeable lead-acid battery system.

The machine uses two 12V / 45Ah lead-acid batteries configured as a 24V / 45Ah battery system.

The 24V / 45Ah battery system provides approximately 1.08 kWh of nominal battery energy.

Typical working time is approximately 2–2.5 hours per charge. Actual runtime varies depending on floor conditions, cleaning intensity, battery condition, battery age, and operating practices.

Typical charging time is approximately 6–8 hours under suitable charging conditions. Actual charging time can vary depending on battery condition, remaining charge, temperature, and charging environment.

Yes. Recharge the batteries after use according to the recommended charging procedures and avoid leaving the machine stored for extended periods with discharged batteries.

Yes. The scrubber is battery powered, allowing the operator to clean without managing a power cord during operation.

No. It uses a push walk-behind configuration that provides straightforward operation and maneuverability.

Yes. The powered scrubbing system cleans the floor while the suction system and rear squeegee recover dirty water behind the machine.

It is suitable for compatible smooth and sealed hard-floor surfaces such as concrete, epoxy-coated floors, tile, vinyl, marble, and similar commercial flooring. Always use a pad and cleaning solution appropriate for the specific floor surface.

Typical applications include retail stores, schools, gyms, offices, healthcare facilities, restaurants, warehouses, commercial buildings, and other compatible indoor commercial environments.

Yes. Its compact walk-behind design and 16 in cleaning path make it practical for aisles, hallways, smaller rooms, entrances, and areas containing shelving, furniture, or equipment.

The standard US-TX SC16 set includes a Red Pad and Pad Holder for compatible pad-based floor-cleaning applications.

Yes. A Red Pad is included with the standard machine set.

Yes. A Pad Holder is included with the standard machine set for installing compatible floor-cleaning pads.

The approximate net machine weight is 194 lb.

The US-TX SC16 measures approximately 34 in long × 20 in wide × 43 in high.

The listed operating noise level is ≤60 dBA, supporting use in many occupied commercial environments.

The US-TX SC16 includes a 12-Month Warranty covering eligible manufacturing defects under normal intended use. Eligible replacement parts supplied under warranty include 90-day coverage against qualifying manufacturing defects. Wheels and other normal wear or consumable components are excluded from replacement-parts warranty coverage.