Volume pricing and wire-transfer savings available on eligible orders.
Pickup and nationwide freight shipping available from our Texas warehouse.
Complete the form and our team will email you a proforma invoice, confirm availability, apply your wire discount, and provide payment instructions.
Submit your request and our team will contact you with availability, estimated lead time, and ordering information.
Built for compact and efficient elevated access, this 15 ft Semi-Electric Scissor Lift combines electric-powered lifting with manual travel for warehouse maintenance, commercial facilities, installation, inspection, repair, and industrial service work. With a 15 ft maximum platform height, 440 lb platform capacity, and compact 45 × 24 in working platform, it provides a practical aerial work solution for everyday indoor elevated-access applications.
Designed for warehouses, workshops, manufacturing facilities, retail stores, commercial buildings, and maintenance departments, the US-TSE15 offers an efficient combination of compact dimensions, straightforward operation, and dependable lifting performance. Its approximately 30 in overall width and 47 in turning radius support practical positioning in compatible indoor work environments with firm, stable, and level surfaces.
Powered by a rechargeable 12V / 105Ah battery and a 12V / 0.8 kW electric lift motor, this Semi-Electric Scissor Lift provides up to 6 hours of working time per charge, with an approximate charging time of 5–7 hours using the specified 12V / 15A charger. The semi-electric configuration allows operators to raise and lower the platform electrically while manually positioning the machine between work areas. Backed by a 12-Month Warranty and Texlift technical support, the US-TSE15 is designed for professional elevated-access applications.
The US-TSE15 provides a maximum platform height of approximately 15 ft for maintenance, installation, inspection, repair, and facility-service applications.
Its compact elevated-access design supports work involving lighting, ceilings, electrical components, HVAC-related equipment, signage, fixtures, and other overhead locations within the machine’s rated operating limits.
The maximum approximate working height is 22 ft, providing additional working reach for compatible overhead commercial and industrial applications.
Working height is an estimated operator reach measurement rather than the actual platform elevation. The US-TSE15 has a maximum platform height of approximately 15 ft.
The elevated working platform supports a maximum rated load of 440 lb, including the operator, compatible tools, equipment, and materials.
Always account for the combined weight of all personnel and materials on the platform. Never exceed the rated platform capacity or other operating limits specified in the equipment manual.
The 45 in long × 24 in wide working platform provides practical standing and working space while maintaining a compact overall machine footprint.
Its platform dimensions support routine maintenance, inspection, installation, and repair work involving an operator and compatible tools within the rated load capacity.
The US-TSE15 combines electrically powered platform lifting with manual machine travel for straightforward elevated-access operation.
The electric hydraulic system raises and lowers the platform without manual pumping, while the machine is manually positioned between work locations according to the operating instructions.
The electric hydraulic lifting system provides powered platform raising and lowering for commercial maintenance and industrial service applications.
This configuration reduces the physical effort associated with manual lifting and supports repeated platform adjustments during routine elevated-access work.
The US-TSE15 is manually propelled and does not feature self-propelled travel.
Its manual positioning system is intended for suitable firm, smooth, stable, and level surfaces. Follow the operating manual when moving the machine, including any restrictions on platform elevation and occupancy.
A dedicated 12V / 0.8 kW electric motor powers the hydraulic lifting system for consistent platform raising and lowering.
Because machine travel is manual, electric power is primarily dedicated to the lifting system rather than a powered traction motor.
The US-TSE15 operates on a rechargeable 12V / 105Ah battery system with approximately 1.26 kWh of nominal battery energy.
The battery supplies electrical power to the hydraulic lifting system, supporting cordless elevated-access operation without requiring a direct electrical connection during lifting.
The rechargeable battery system provides up to approximately 6 hours of working time per charge under suitable operating conditions.
Actual operating time depends on lifting frequency, platform load, battery condition, temperature, operating intensity, and other working conditions.
The US-TSE15 uses a specified 12V / 15A charging system designed for its rechargeable battery configuration.
Typical charging time is approximately 5–7 hours under suitable conditions. Actual charging time may vary depending on the remaining battery charge, battery condition, temperature, and charger performance.
With an approximately 30 in overall width, the US-TSE15 provides a compact footprint for maneuvering through compatible indoor commercial and industrial environments.
Its narrow configuration is useful for warehouses, workshops, maintenance areas, and commercial buildings where larger elevated-access equipment may be difficult to position.
The approximately 47 in turning radius supports practical maneuverability when manually positioning the machine in compatible indoor workspaces.
Combined with the compact 30 in overall width, this configuration helps operators position the scissor lift around suitable aisles, fixtures, equipment, and maintenance areas.
The US-TSE15 provides elevated access for warehouse lighting, overhead fixtures, electrical components, ceiling inspections, repairs, and routine facility maintenance.
Its compact dimensions and electric-powered lifting system make it practical for suitable warehouse and distribution environments with firm and level floors.
Designed for routine facility service, this Semi-Electric Scissor Lift supports elevated maintenance work in commercial buildings, retail properties, offices, and service facilities.
Typical applications include overhead inspections, lighting replacement, fixture installation, painting, repairs, and preventive maintenance within the machine’s rated operating range.
The elevated platform provides access to compatible lighting fixtures, electrical components, conduit, ceiling systems, and HVAC-related equipment.
Electric-powered platform lifting allows operators to adjust working height for installation, inspection, servicing, and repair tasks while following applicable electrical and aerial-platform safety procedures.
The US-TSE15 supports installation and maintenance of compatible overhead signage, displays, fixtures, shelving components, and other elevated equipment.
Its compact working platform and semi-electric configuration provide a practical solution for installation and service tasks that do not require self-propelled travel.
The US-TSE15 is designed primarily for operation on firm, stable, level, and adequately supported surfaces.
This model is not intended for rough terrain, loose gravel, unstable ground, or severely uneven surfaces. Always verify floor load capacity, machine stability, overhead clearance, and site conditions before use.
The compact semi-electric design is suitable for compatible warehouses, workshops, retail facilities, manufacturing buildings, maintenance departments, and commercial properties.
Its 15 ft platform height, 440 lb platform capacity, and electric hydraulic lifting system provide a practical combination for professional indoor elevated-access tasks.
The US-TSE15 includes a 12-Month Warranty covering eligible manufacturing defects in materials and workmanship under normal intended use, subject to applicable Texlift warranty terms.
Eligible replacement parts supplied by Texlift include 90-day coverage against qualifying manufacturing defects. Normal wear items, including wheels and other consumable components, are excluded from replacement-parts warranty coverage.
Damage caused by misuse, overloading, accidents, improper operation, incorrect charging, inadequate maintenance, or unauthorized modifications is not covered.
Texlift provides technical assistance for equipment operation, troubleshooting, maintenance questions, and identifying compatible replacement parts. For support, contact office@texlift.com.
The US-TSE15 Semi-Electric Scissor Lift uses a rechargeable 12V / 105Ah battery system. Proper battery care is essential for maintaining dependable lifting performance, operating runtime, and long-term battery service life.
Do not continue operating the equipment when the battery reaches 20% charge or below. Stop operation at 20% remaining charge and recharge the battery before returning the scissor lift to service.
Avoid deeply discharging the battery or leaving the machine stored for extended periods with a discharged battery. Recharge after use and follow the recommended storage and maintenance procedures.
Use charging equipment and settings approved for the installed battery type. The specified charging system is 12V / 15A, with an approximate charging time of 5–7 hours under suitable conditions.
Actual working time and battery service life depend on lifting frequency, platform load, battery condition, charging practices, operating temperature, and maintenance.
Always follow the operating manual for proper battery charging, inspection, maintenance, storage, and safe elevated-platform operation.
Tell us your application, required capacity, lift height, working environment, and delivery location. Our team can help you select the right machine for your operation.
Review the key dimensions, performance data, power information, fitment details, and product configuration.
| Specification | Value | Description |
|---|---|---|
| Model | US-TSE15 | Semi-electric scissor lift designed for commercial and industrial elevated-access applications |
| Platform Height | 15 ft | Maximum platform height for maintenance, installation, inspection, and elevated-access work |
| Working Height | 264 in (22 ft) | Maximum approximate working height for overhead commercial and industrial applications |
| Load Capacity | 440 lb | Maximum rated platform capacity for operator, tools, and compatible materials |
| Platform Size | 45 × 24 in | Working platform dimensions provide practical operator and tool space |
| Power Source | Semi-Electric | Electric-powered lifting combined with manual machine travel |
| Travel System | Manual | Machine is manually positioned between work locations |
| Lift System | Electric Hydraulic | Battery-powered hydraulic system raises and lowers the working platform |
| Lift Motor | 12V / 0.8 kW | Electric motor powers the hydraulic lifting system |
| Battery | 12V / 105Ah | Rechargeable battery supplies power to the electric lifting system |
| Battery Voltage | 12V | Electrical system operating voltage |
| Battery Capacity | 105Ah | Rated battery capacity for electric lifting operation |
| Battery Energy | Approx. 1.26 kWh | Nominal battery energy based on the 12V / 105Ah battery system |
| Working Time | Up to 6 Hours | Approximate operating time per full charge depending on lifting frequency, platform load, battery condition, and working conditions |
| Charging Time | Approx. 5–7 Hours | Typical battery charging time under suitable conditions using the specified charger |
| Charger | 12V / 15A | Charger matched to the 12V battery system |
| Minimum Platform Height | 35 in (2 ft 11 in) | Lowest listed platform position for access and transport |
| Turning Radius | 47 in (3 ft 11 in) | Compact turning radius supports maneuverability in compatible indoor work areas |
| Overall Length | 50 in (4 ft 2 in) | Approximate total machine length |
| Overall Width | 30 in (2 ft 6 in) | Compact machine width supports maneuverability in tighter commercial and industrial spaces |
| Overall Height | 74 in (6 ft 2 in) | Approximate overall machine height with the platform lowered |
| Ground Clearance | 2.36 in | Low ground clearance designed for firm, smooth, and level operating surfaces |
| Wheel Diameter | 5.91 in | Wheel diameter designed for movement across compatible smooth and level surfaces |
| Machine Weight | 1,060 lb | Approximate machine weight including battery |
| Recommended Environment | Indoor & Level-Surface Commercial | Best suited for warehouses, commercial facilities, workshops, maintenance areas, industrial facilities, and compatible job sites |
| Best Use | Elevated Access & Maintenance | Designed for maintenance, installation, inspection, repair, and overhead work |
| Typical Applications | Warehouses, Facilities, Contractors, Workshops, Retail & Industrial Maintenance | Suitable for a wide range of commercial and industrial elevated-access applications |
| Warranty | 12-Month Warranty | Coverage for eligible manufacturing defects subject to applicable Texlift warranty terms and conditions |
| Important Battery Notice | Do Not Operate at 20% or Below | Stop operation and recharge the battery when the battery reaches 20% charge. Do not continue operating at or below 20% charge |
Find answers to common questions about this product, including operation, performance, setup, charging, maintenance, shipping, and ownership.
The US-TSE15 provides a maximum platform height of approximately 185 in (15 ft 5 in), making it suitable for maintenance, installation, inspection, repair, and other elevated-access applications.
The maximum approximate working height is 264 in (22 ft). Working height represents the approximate overhead reach available to an operator and is different from the machine's platform height.
The US-TSE15 has a maximum rated platform capacity of 440 lb, including the combined weight of the operator, tools, equipment, and compatible materials.
The working platform measures approximately 45 × 24 in, providing practical standing and tool space while maintaining a compact machine footprint.
Yes. The US-TSE15 uses electric-powered hydraulic lifting while machine travel is manual, making it a practical option where self-propelled travel is not required.
No. Travel is manual. The machine must be manually positioned between work locations according to the recommended operating procedures.
The platform uses an electric hydraulic lifting system powered by a 12V / 0.8 kW lift motor.
The scissor lift uses a rechargeable 12V / 105Ah battery to power the electric lifting system.
The 12V / 105Ah battery provides approximately 1.26 kWh of nominal battery energy.
The US-TSE15 provides up to approximately 6 hours of working time per full charge under suitable operating conditions. Actual runtime depends on lifting frequency, platform load, battery condition, temperature, and operating intensity.
Typical charging time is approximately 5–7 hours using the specified 12V / 15A charger under suitable charging conditions. Actual charging time depends on remaining battery charge, battery condition, temperature, and charger performance.
The machine uses a 12V / 15A charger matched to its rechargeable 12V battery system.
No. Stop operation and recharge the battery when it reaches 20% charge. Do not continue operating the battery at or below 20% charge.
The minimum listed platform height is approximately 35 in.
The machine is approximately 30 in wide, providing a compact footprint for maneuvering through compatible commercial and industrial work areas.
The US-TSE15 is approximately 50 in long, 30 in wide, and 74 in high with the platform lowered.
The US-TSE15 has an approximately 47 in turning radius, supporting maneuverability when positioning the machine in compatible indoor work areas.
Ground clearance is approximately 2.36 in, making the machine best suited for firm, smooth, and level operating surfaces.
The wheels are approximately 5.91 in in diameter and are designed for movement across compatible smooth and level surfaces.
The machine weighs approximately 1,060 lb including the battery.
Yes. The US-TSE15 is particularly well suited for indoor commercial and industrial applications on firm, stable, level, and adequately supported surfaces.
No. The US-TSE15 is designed primarily for firm, smooth, and level surfaces and is not intended as a rough-terrain or off-road scissor lift.
It is well suited for warehouses, commercial buildings, workshops, retail facilities, manufacturing facilities, maintenance departments, service centers, and other compatible commercial and industrial environments.
Typical applications include lighting maintenance, electrical work, ceiling access, HVAC-related service, signage installation, fixture installation, inspections, painting, repairs, preventive maintenance, and other compatible elevated-access work.
The US-TSE15 includes a 12-Month Warranty covering eligible manufacturing defects, subject to applicable Texlift warranty terms and conditions.
Contact our equipment team with your application, required capacity, lift height, working environment, or product question and we can help.
Access available manuals, specification sheets, warranty information, and service resources for this product.
Operating instructions, safety information, and product guidance.
Compare the most important specifications, pricing, and availability across similar models to find the best fit for your operation.
Explore the environments and operations where this equipment delivers reliable performance, productivity, and efficient material handling.
Provides elevated access for lighting, electrical systems, ceiling components, fixtures, shelving areas, inspections, repairs, and routine warehouse maintenance.
Suitable for elevated maintenance and facility-service work in commercial buildings with firm, stable, and level operating surfaces.
Provides practical elevated access for replacing, installing, inspecting, and servicing compatible overhead lighting fixtures.
Supports elevated access to compatible wiring, conduit, electrical components, junction areas, and other overhead electrical systems.
Provides elevated access for compatible HVAC inspections, maintenance, installation, and service work within the machine's rated operating height.
Suitable for inspections, maintenance, repairs, and installation work involving ceilings and compatible overhead building components.
Provides a stable elevated working platform for installing, servicing, inspecting, or replacing compatible indoor signage and displays.
Suitable for installing and servicing lighting fixtures, displays, shelving components, overhead equipment, and other compatible commercial fixtures.
Provides elevated access for inspecting building components, equipment, overhead systems, fixtures, and other areas requiring elevated positioning.
Supports routine elevated inspections, servicing, adjustments, and preventive maintenance throughout commercial and industrial facilities.
Provides elevated access for compatible repairs to lighting, fixtures, building components, electrical systems, equipment, and other overhead installations.
Suitable for compatible indoor painting, touch-up, finishing, and facility-maintenance work within the machine's rated height and capacity.
Provides compact elevated access for maintenance, inspection, installation, and repair work throughout compatible manufacturing environments.
Suitable for elevated maintenance and installation tasks in workshops, service facilities, equipment areas, and other commercial workspaces.
Provides elevated access for lighting, signage, displays, fixtures, ceiling components, inspections, and maintenance in compatible retail environments.
Supports routine elevated maintenance, inspection, installation, and repair work throughout compatible industrial facilities.
Provides a compact semi-electric elevated-access solution for contractors performing compatible installation, maintenance, inspection, repair, and facility-service work.
Designed primarily for elevated work on firm, stable, level, and adequately supported indoor commercial and industrial surfaces.
The approximately 30 in overall width and 47 in turning radius support positioning in compatible indoor areas where larger access equipment may be more difficult to maneuver.
The approximately 185 in platform height provides elevated access for maintenance, installation, inspection, and repair work requiring a platform height of approximately 15 ft.
Provides an approximate 22 ft maximum working height for compatible overhead maintenance and facility-service tasks.
Supports an operator, tools, equipment, and compatible materials with a combined platform load of up to 440 lbs.
Electric-powered platform lifting combined with manual travel provides a practical solution for facilities where self-propelled machine travel is not required.
Review warranty coverage, included equipment, technical support, maintenance guidance, parts assistance, and important ownership information for this product.
The US-TSE15 includes a 12-month warranty covering eligible manufacturing defects under normal intended use, subject to applicable Texlift warranty terms and conditions.
Texlift technical assistance is available for product operation, troubleshooting, electric lifting, hydraulic functions, controls, charging, routine maintenance, and general equipment questions.
Technical assistance is available for the 12V / 0.8 kW lift motor, electric hydraulic lifting system, platform raising and lowering functions, and related components.
Assistance is available for the 12V / 105Ah rechargeable battery, including charging guidance, battery inspection, maintenance, storage, and performance troubleshooting.
Technical guidance is available for the 12V / 15A charger, charging procedures, charger connections, battery condition, and charging-system troubleshooting.
Assistance is available for the hydraulic lifting system, cylinders, hoses, fittings, connections, and troubleshooting related to platform lifting and lowering.
Technical assistance is available for the working platform, scissor mechanism, structural components, platform controls, and related elevated-access components.
Assistance is available for wheels, steering, manual positioning, maneuverability, and components associated with moving the machine between work locations.
Texlift provides assistance identifying compatible replacement parts for the battery, charger, electric lift system, hydraulic components, controls, platform components, wheels, scissor mechanism, and other service parts.
Regularly inspect the platform, scissor mechanism, hydraulic system, battery, charger, controls, wheels, structural components, fasteners, safety components, and electrical connections to help maintain dependable operation.
Follow recommended charging, operating, maintenance, and storage procedures. Use compatible charging equipment and protect the battery from excessive discharge, improper charging, physical damage, moisture, extreme temperatures, and unsuitable storage conditions.
Normal wear, wheels and other consumable or wear items, misuse, overloading, accidents, improper operation, improper charging, inadequate maintenance, unauthorized modifications or repairs, and damage resulting from use outside the machine's intended operating conditions are not covered.
Do not operate the US-TSE15 when the battery reaches 20% charge or below. Stop operation and recharge the battery before continuing use. Operating the battery at or below 20% may reduce battery performance, shorten battery service life, and may cause battery damage.
Contact our equipment team with your product model, order information, and a description of your question or issue. Our team can help identify the appropriate next steps, available parts, or technical support options.
Explore additional equipment selected to complement your material handling operation.
✓ Financing Available
✓ Fast Parts Support
✓ Commercial Equipment Experts
✓ Secure Online Ordering
The Lift arrived in excellent condition. The only issues were missing screws in the drawer slides and the spare fuse was broken. the platform gate would not latch, but works fine after some adjustments.